Filter
Top Products
VIZIO GV42L FHDTV10A User Manual
Version 10/9/2007 31
www.VIZIO.com
2.7 Connecting a PC Computer
1. Turn off the power to the LCD HDTV and PC Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the
other end to the RGB PC input (purple area) at the rear of the LCD HDTV.
3. Connect the Audio Out on your pc computer to the RGB PC Audio input (purple area) at the
rear of the LCD HDTV.
4. Turn on the power to the LCD HDTV and PC Computer.
5. Select RGB using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the RGB button on the Remote Control.
Note:
a) For the best picture quality, please refer to the pc or graphic card’s user guide to find out if it
is capable of an output of VESA 1920x1080 at 60Hz resolution when using the parameters
and values given to you on Section 2.7.2 of this User’s Manual. If not supported, then use
VESA 1360x768 at 60Hz to obtain the next to best quality of resolution.
b) Refer to your pc computer user manual for more information about the video output
requirements of the product.
c) A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an
electronics store.