Filter
Top Products
VIZIO GV42L FHDTV10A User Manual
Version 10/9/2007 61
www.VIZIO.com
If on Step 6 PIP is selected then:
12. Press the button on PIP menu screen to the desired option; INPUT, SIZE or POSITION
13. It is recommended to select the size of the screen first; the options being Small, Medium and
Large.
14. Press the button to scroll down to size (it will change to yellow color)
15. Press the or button to make your selection; it will take at least three times of pressing the
same button to go through the choices.
16. Now that the size has been chosen you would like to select the location (position).
17. Press the button and scroll down to Position, a yellow color implies that you are at the right
option.
18. Press the or button to go through the different places where the small screen can be
placed. There are eight locations; three on the right hand side, three on the left hand side, one on top
center and one on bottom center of the screen (display). Please make sure to select your choice.
19. Now that you have already selected Size and Position, press the button to select the Input
option; again the choice will be yellow to show that it has been selected.
20. Press the or button as many times as it take you to get to the right choice or option. Only
the signal inputs allow on the previous chart will show up when you are going through the choices.
21. Now, enjoy the PIP feature.
Note: If you are a constant user of this feature, please allow yourself enough time to get familiar with
these steps.
Reminder
: When in PIP/POP mode, 1080P is not available in
the sub screen display. The sub screen will
display a message to that effect.
4.18.4 Setting the Sleep Timer
The Sleep Timer lets you set a time delay to turn off the LCD HDTV automatically.
To set the Sleep Timer using the remote control:
1. Press the SLEEP button on the remote control. The Sleep Timer appears in the center of
you screen.
2. Press the SLEEP button one or more times to select the time you want. The choices are 30,
60, 90 or 120 minutes.
To turn off the sleep time using the remote control, press the SLEEP button repeatedly until Off appears
on the screen.