Filter
Top Products
CONFIDENTIAL – DO NOT COPY
Page 2-4
File No. SG-0198
9-3. HANDLING PRECAUTIONS FOR PROTECTION
(1) The protection film is attached to the bezel with a small masking tape. When the
protection film is peeled off, static electricity is generated between the film and
polarizer. This should be peeled off slowly and carefully by people who are electrically
grounded and with well ion-blown equipment or in such a condition, etc.
(2) When the module with protection film attached is stored for a long time, sometimes
there remains a very small amount of glue still on the bezel after the protection film is
peeled off.
(3) You can remove the glue easily. When the glue remains on the bezel surface or its
vestige is recognized, please wipe them off with absorbent cotton waste or other soft
material like chamois soaked with normal-hexane.