VIZIO VA22L FHDTV10T User’s Manual
Version 9/12/2008 12
www.VIZIO.com
WIDE – Cycle through the available screen formats (Wide, Normal, and
Panoramic). Note: in RGB/PC mode the options are 4:3 and 16:9.
SLEEP – Press to select the sleep options from 30 to 120 minutes.
MTS – Select the MTS option (Stereo, SAP, or Mono). In DTV mode,
select alternate audio channels, where available.
CC – select the Closed Caption mode (OFF, CC1, CC2, CC3, or CC4).
TV – Press to select TV mode.
AV – Press repeatedly to cycle between AV1 and AV2 inputs.
COMPONENT – Press to select the Component input.
HDMI – Press repeatedly to cycle between HDMI 1 and HDMI 2 inputs.
RGB – Press to select an RGB component such as a computer.
MODE – Select the picture mode (Custom, Standard, Movie, or Game).
The following buttons are disabled because your HDTV does not have
those features:
• FREEZE
• PIP
• PIP CH
• AUDIO
• PIP INPUT
• PIP SIZE
• SWAP
• ZOOM
Remote Control Range
• The effective range of the remote control is approximately 26 feet (8 meters) from the front of the
receiver window and 13 feet (4 meters) when 30° to the left and right, 20° up and down.
• Point the remote control at the remote control sensor on the front of your HDTV to send
commands.
• Do not place any obstacles between the remote control and the remote control sensor.
VIZIO Remote Control Precautions
• Keep the remote control dry and away from heat sources. Avoid humidity.
• If your HDTV responds erratically to the remote control or does not respond at all, check the
batteries. If the batteries are low or exhausted, replace them with fresh batteries.
• When not using the remote control for a long period of time, remove the batteries.
• Do not take the batteries apart, heat them, or throw them into a fire.
• Do not subject the remote control to undue physical stress, such as striking or dropping it.
• Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp
cloth.
• Do not mix old and new batteries or different types of batteries.