Filter
Top Products
VIZIO VA22L FHDTV10T User’s Manual
Version 9/12/2008 28
www.VIZIO.com
Selecting Inputs
1. Press INPUT on the remote to select the input source that matches the connection you made on
the back of your HDTV. Repeated presses of INPUT cycles you through the options.
2. Turn on your component (cable box, VCR, satellite receiver, DVD player, etc.). You should see a
picture on your HDTV. If you do not see a picture, press INPUT repeatedly until you do see a
picture.
NOTE: If the selected input is RF, your HDTV needs to be on either channel 3 or 4 to match the
channel on the VCR, cable box, external TV tuner or satellite receiver. Refer to the User’s Manual of
your equipment for details.
NOTE: Your HDTV will display the television station or program selected by the cable box, VCR,
external tuner, or satellite receiver. Use the remote control that came with that component to change
programs or channels. If the service being used is the one which setup includes a box with two
outputs for two different (distant) rooms, then scanning channels will help you to find the signal. Be
aware that the channel to be selected varies from provider to provider. You may have to call your
provider to get the specific channel when using your HDTV. Some examples of these channels are
105, 106, 115, and 116.