Filter
Top Products
VIZIO VBR100 User Manual
Network Menu
1. Press the SETUP button on the remote control.
2. Press ! or " to select Settings.
3. Press
! or " on the remote control
to select Network.
4. Press # to move to the list of options.
5. Press ! or " to highlight an option,
and then press #.
6. Press
! or " to make your selection
and then press SELECT.
7. Press RETURN once to return to the
sub-menu OR press SETUP to exit
the Settings menu.
Wired
Link Status
This option shows if the network is connected or not. This is not
a setting that you adjust. It is for information only.
IP Mode
Select from Dynamic, Manual, or Off. When set to Dynamic an
IP address is automatically assigned. Select Manual to change
the IP Address, Subnet Mask, Gateway, Primary DNS, and
Secondary DNS settings. When set to Off no IP address is
entered. Consult your router user manual or Internet service
provider for more information on dynamic or manual IP address
settings.
Network Test
Test to see if the network connection is working correctly.
30
www.VIZIO.com