Vizio VL320M TV Antenna User Manual


 
VIZIO VL320M/VL370M User Manual
Version 3/6/2009 39
www.VIZIO.com
TV Menu
When you first turned on your HDTV you set up your TV for DTV / TV channels using the Initial Setup
screens. If you did not do this or if your setup has changed, you can do this from the TV
menu.
1. Press the MENU button on the remote control or the side of the TV and the Picture menu will be
shown on the screen.
2. Press either
or on the remote control or CH or CH on the side of the HDTV to highlight
the TV menu option.
3. Press the MENU button to select the options in the TV menu.
4. Press either
or on the remote control or CH or CH on the side of the HDTV to select a TV
menu option.
5. Once the menu option is highlighted, press either or on the remote
control or VOL + or VOL – on the side of the HDTV to adjust the setting.
6. Press the LAST key once to return to the previous screen or repeatedly to
return to your program if the task has been completed.
TV menu options:
Tuner Mode
Select Cable or Air (Antenna) depending upon which equipment you have
attached to the DTV / TV Input.
Auto Search
Automatically search for TV channels that are available in your area. The TV
will search for analog and digital channels.
Partial Channel Search
If you believe channels are missed from the auto search, you can do a partial
channel search to look for channel in a certain channel range again. Select to
scan for Analog, Digital, or both Analog/Digital channels, then press the
button to highlight the “To” and “From” selection. Press the button to select
the range of channel numbers you want to start searching in. Press MENU to
start channel search.
Skip Channel
After the TV has stored all of the available digital channels in memory you will
find that some channels are too weak to watch comfortably or they may be
channels you do not want to see. Press the button to select the channel to
be skipped when using the CH
or CH buttons. You will still be able to
select this channel using the number buttons on the remote control.
MTS
This feature allows you to select the different languages the broadcaster is transmitting the audio with the
program you are watching. This signal is usually Spanish.