Vizio VUR5 Universal Remote User Manual


  Open as PDF
of 16
 
VIZIO VUR5 Universal Remote User Manual
Version 8/8/2008
www.vizio.com
6
2.0
2.02.0
2.0
Programming the VIZIO Universal Remote Control
Programming the VIZIO Universal Remote ControlProgramming the VIZIO Universal Remote Control
Programming the VIZIO Universal Remote Control
You can program the remote control to work with up to four different components. Listed below are the steps for
programming your VCR, Cable Box and DVD Player.
2.1.1
2.1.12.1.1
2.1.1 Programming for VCR
Programming for VCRProgramming for VCR
Programming for VCR
1. Manually turn on the VCR.
2. Press the VCR button on the remote control.
3. Press and hold the SETUP button until the LED LIGHT flashes twice.
4. Find the programming code for your VCR in the code list in the back of this book and enter it using the Number
Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
5. Point the remote control at the VCR and press the POWER button. The VCR will turn off.
2.1.2
2.1.22.1.2
2.1.2 Programming for Cable Set
Programming for Cable SetProgramming for Cable Set
Programming for Cable Set-
--
-Top Box
Top BoxTop Box
Top Box
1. Manually turn on the Cable Box.
2. Press the CBL button on the remote control.
3. Press and hold the SETUP button until the LED LIGHT flashes twice.
4. Find the programming code for your Cable Box in the code list in the back of this book and enter it using the Number
Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer.
5. Point the remote control at the Cable Box and press the POWER button. The Cable Box will turn off.
Note:
a) If your VCR d
oes not respond, try all the codes for your VCR brand. If the codes do not
work, or your brand is not listed, see “Searching for Component Codes.”
b)
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
Note:
a) If your Cable Set-
Top Box does not respond, try all the codes for your brand. If the codes
do not work, or your brand is not listed, see “Searching for Component Codes.”
b) Sometimes a code listed will only include limited functions. Try other
codes that may
include more functionality.
 previous next