Vizio VUR5 Universal Remote User Manual


  Open as PDF
of 16
 
VIZIO VUR5 Universal Remote User Manual
Version 8/8/2008
www.vizio.com
7
2.1.3
2.1.32.1.3
2.1.3 Programming for DVD Player
Programming for DVD PlayerProgramming for DVD Player
Programming for DVD Player
1. Manually turn on the DVD Player.
2. Press the DVD button on the remote control.
3. Press and hold the SETUP button until the LED LIGHT flashes twice.
4. Find the programming code for your DVD player in the code list in the back of this book and enter it using the Number
Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer.
5. Point the remote control at the DVD Player and press the POWER button. The DVD Player will turn off.
2.1.4
2.1.42.1.4
2.1.4 Searching for Component Codes
Searching for Component CodesSearching for Component Codes
Searching for Component Codes
If you cannot find the manufacturer in the component list or the program code does not work, you can use the remote
control to search for the correct component code.
To search for a component code:
1. Turn on the component.
2. Press the matching component button on the remote control.
3. Press and hold the SETUP button until the LED flashes twice.
4. Press 9 9 1. The LED flashes twice.
5. Point the remote control at the component and then alternate between pressing the POWER button and the
component button on the remote control until the component turns off.
If the component still does not respond, clear the component button, then repeat the search procedure.
Note:
a)
If your DVD player does not respond, try all the codes for your brand. If the codes do not
work, or your brand is not listed, see “Searching for Component Codes.”
b) Sometimes a code listed will only include
limited functions. Try other codes that may
include more functionality.
 previous next