Filter
Top Products
VIZIO XVT472SV User Manual
Version 1/26/2010 31
www.VIZIO.com
COMPUTER
Using Optical (S/PDIF)
If your sound system has a S/PDIF (optical) digital audio input you can connect it from your sound system
to the OPTICAL digital audio out on your HDTV. This is active when receiving audio with the programs
being viewed no matter what input is being used.
1. Connect one end of the optical cable to optical connectors on the home theater and the other end
to the OPTICAL jack on your HDTV.
2. Turn on the power to your HDTV and home theater.
3. Change the input on your home theater to optical. See your home theater user manual for more
information.
Connecting a Computer
1. Set computer to a resolution supported by your HDTV (see PC Preset Resolution table and
Reduced Blanking Table on page 77). If your computer supports it, we recommend 1920x1080.
2. Turn off the power to your HDTV and computer.
3. Connect the VGA cable from your computer to the RGB PC jack on the back of your HDTV.
4. Connect the 1/8-inch audio cable from your computer to the RGB PC Audio jack on the back of
your HDTV. This step is optional and only needed if you want to sound to come from the
computer through your HDTV.
5. Turn on the power to your HDTV and computer.
6. Select RGB using the INPUT button on the remote control.
Note: Refer to your PC computer user manual for more information about the video output requirements.
Note: See PC Preset Resolution table and Reduced Blanking Table on page 77.