Filter
Top Products
1. Connect all cables to the station first. This would include the video adapter cable and the
optional IR touch screen cable.
2. After connecting the cables between the LCD monitor and the station, plug the power cord
into the display.
3. Switch on the display power switch.
4. Reboot the station.
5. Your display should now operate showing the station video information.
Note: The displays are factory OSD adjusted for each configuration. However, additional OSD
adjustments may be required (See section 3).
4
⇒
18.1” LCD Monitor
⇒ Video adapter cable (HD15 to DB9 or HD15 to 5BNC)
⇒ Accessory Kit: 2-Chassis stops; OSD Membrane Kit; Optional Chassis Brackets; IR touch
frame cable; VT181CH includes a HD15 to DB9 Video Adapter Cable; VT181CHE includes
a HD15 to 5BNC Video Adapter Cable.
⇒ Users Guide (Printed or on CD)
2.2
Unpacking and setting up your display
Your LCD monitor package will consist of the basic components listed below. Depending on the
display configuration, additional components are supplied.
2.3
What is included with your display
2.4
Connecting the Display
2.5
Signal Connections
To avoid irregular operation and /or damage to the display, please insure correct video is being
supplied as shown on the following page.