Filter
Top Products
VIZIO VO32L FHDTV10A User Manual
12
www.VIZIO.com
Rear Panel Connections
1. SERVICE – This custom communication port is for factory service only. Use of this input for any
purpose other than factory authorized service will void the manufacturer’s warranty of this
equipment.
2. HDMI 1 –
Connect the primary source for digital video such as a DVD multimedia player or set top box
through this all digital connector. The white color band on the rear of the TV indicates this connection
.
3. HDMI 2 – Connect a secondary source for digital video such as a DVD multimedia player or set top
box through this all digital connector. The white color band on the rear of the TV indicates this
connection. For users who want to connect to a DVI enabled device, use a DVI-HDMI cable and
connect the Analog Audio output of the device to the L+R AUDIO here. . Your VIZIO Certified
HDMI and HDMI-DVI cables are available for purchase from www.VIZIO.com
or by calling 888-
VIZIOCE (888-849-4623).
4. RGB PC – Connect the video and audio from a computer here. The blue color band on the rear of
the TV indicates this connection. A 1/8” plug stereo cable is needed to connect the audio out from
the computer to the connector in the rear of the TV for audio from computer.
5. COMPONENT1 (YPb/CbPr/Cr with Audio L/R) – Connect the source for component video devices
such as a DVD Player or set top box here. From left to right, use white for left audio and red for
right audio inputs, green for Y, blue for Pb (or Cb) and red for Pr (or Cr). The green color band on
the rear of the TV indicates this connection.
6. AV1/S-VIDEO IN – Connect the primary source for composite video devices, such as a VCR or
video game. Use the white and red connectors to connect the external audio from the same source,
then use the S-Video or yellow connector to connect the external video from the same source. The
S-Video, if connected, will take priority over AV RCA (yellow) connector. The yellow color band on
the rear of the TV indicates this connection.
7. OPTICAL DIGITAL AUDIO OUT – When a digital audio signal is associated with an input which is
selected for viewing, the digital audio associated with digital programming will be available on this
SPDIF Optical connector for connection to your home theatre system. The white color band on the
rear of the TV indicates this connection.
8. ANALOG AUDIO OUT – Connect the audio from the LCD HDTV to an external device, such as a
home theater system, external amplifier or stereo. Speakers cannot be connected directly to here.
The white color band on the rear of the TV indicates this connection.
9. DTV – Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for Digital TV.*
10. AC IN – Plug-in the supplied AC Power Cord here.
* For digital TV stations in your area visit www.antennaweb.org
.
1
2
3
9
8
4
6
5
7
10