Wegener Communications 6400 Home Theater Server User Manual


  Open as PDF
of 6
 
iPUMP 6400 QUICK START GUIDE iPUMP 6400 QUICK START GUIDE
800009-03 Rev. A 2 Professional Video Professional Video 11 800009-03 Rev. A
Data, drawings, and other material contained herein are proprietary
to Wegener Communications, Inc., and may not be reproduced or
duplicated in any form without the prior written permission of
Wegener Communications, Inc.
The information contained herein is subject to change without notice.
Revisions may be issued to advise of such changes and/or additions.
WEGENER
, COMPEL CONTROL
, MEDIAPLAN
, ENVOY, UNITY
,
UNITY·IP
, and iPUMP
are trademarks of Wegener Communications,
Inc. All other trademarks are the property of their respective owners.
2004 Wegener Communications, Inc. All rights reserved.
Portions copyright 1992-2001 FairCom Corporation. "FairCom" and
"c-tree plus" are trademarks of FairCom Corporation and are
registered in the United States and other countries. All Rights
Reserved.
Correspondence regarding this publication,
800009-03 Release A
First Edition: April 2005
should be forwarded to:
Wegener Communications, Inc.
Technology Park/Johns Creek
11350 Technology Circle
Duluth, GA 30097-1502
Phone: 770-814-4000
Fax: 770-623-0698
The Wegener iPump 6400 is approved under FCC Part 15B Class A,
UL1950, CSA, and CE.
Step Press Display / Field Details Screen Type
a.
ww
UNIT SETUP Menu
b.
ENTER RECORD AND PLAY Menu
c. ww
DECODER SETUP Menu
d.
ww
AUDIO SETUP Menu
e.
ww
IP SETUP Menu
f.
ENTER IP Address
____________
Data Display
g. Record the IP Address of the iPump unit displayed on the LCD
screen.
h. Using a computer on the Ethernet LAN attached to the iPump,
open your web browser.
i. Type the IP Address noted from the IP Address screen in the
browser's address box.
Note: For IP addresses that include subfields with leading zeros,
you must omit those zeros when entering the address in
your browser. For example, IP address 128.092.056.004
would be entered as 128.92.56.4.
Note: In some cases, it may be necessary to set specific values for
the IP and Subnet addresses. Consult your network
administrator.
j. Press <Enter> (on the computer keyboard) and the iPump's
Status page will be displayed (Figure 4).
k. Click the appropriate tab to select Files, Schedule, Status,
Help, or Setup.
 previous next