Westinghouse SK-26H640G Flat Panel Television User Manual


 
EXTERNAL DEVICE CONNECTIONS
19
English
A position on the RF switch (not supplied) – You can view all unscrambled
channels by using the TV's channel keys.
B position on the RF switch (not supplied) –
You can view the scrambled
channels via the converter/descrambler by using the converter's channel
keys.
EXTERNAL DEVICE CONNECTIONS
You can enjoy picture and sound by connecting various audio-video devices to the
terminals located on the rear and side I/O panels of the LCD TV.
TV cable input – You can use a commercially available aud
io/video cable.
Component (YPbPr) input – Picture can be displayed only when a 480i,
480P, 720P or 1080i signal is received.
HDMI input – Picture can be displayed only when a 640 x 480, 480P, 720P
or
1080i signal is received. When you connect to the HDMI terminal with a
DVI-HDMI conversion cable, there is a possibility that the picture may not
display correctly.
Audio output – You can output audio signals from the LCD T
V set through
the analog audio out and SPDIF terminals.
IMPORTANT:
Turn off the LCD TV first before connecting an
external device to prevent
any possible damage or physical injury.
For more information about external device connections, see the opera
tion
manual of the external device you wish to connect to the LCD TV.
Make sure that the correct cables are connected to each terminal.
Improper cable connections may cause damage to the LCD TV.
RF switch (not supplied)
Cable TV line
A
B
IN
OUT
Two-set
signal
splitter
(Not
supplied)
Cable TV
converter/descrambler
(Not supplied)