Filter
Top Products
English
IMPORTANT INFORMATION
NOTICES
Important Notices Concerning Power Cord Selection
The specific power cord for this LED TV is enclosed and has been selected
according to the country of destination. Use the enclosed power cord to prevent
electric shock. Observe the following guidelines if it is necessary to replace the
original cord set, or if there is no cord set enclosed. The female receptacle of the
cord set must meet IEC-60320 requirements and should look like Figure A1 below:
Figure A1
Figure A2
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2),
UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table,
type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly
on the floor, only SJT type cord sets may be used. The cord set must be selected
according to the current rating for the LED TV. Consult the table below for the
selection criteria of power cords used in the United States and Canada.
Cord Type
Size of Conductor in Cord
Maximum Unit Current Rating
SJT
1
8
A
W
G
16 AWG
14 AWG
1
0
Am
p
s
12 Amps
12 Amps
SVT
1
8
A
W
G
17 AWG
1
0
Am
p
s
12 Amps
Figure a1
Figure a2
I-SHENG
SP-12N
X
E55943
7A
125V
K
Detachable, Max. 4.5 m long, Min. 1.5 m long, Type SVT, SJT or SPT-2, No. 18
AWG/2C. One end terminates in NEMA 1-15P with min. 125 V ac, 2.0 A
min., or
NEMA 2-15P with min. 250 V ac, 2.0 A min., the other end with an
appliance coupler.
3
Figure a2-1