Filter
Top Products
14
English
4. Connect power cables
Connect the power cord to the LCD TV then to a properly grounded AC outlet.
5. Turn Power On
Press the Power button on the right side of the LCD TV, or press the Power (Red)
button on the remote control.
6. Select input source for the LCD TV using the OSD menu or remote
control direct select buttons
7. If connecting to Antenna, Cable or other RF source on TV Inputs:
See page 20 to scan and edit available channels.
8. If connecting to a PC (VGA):
For the best picture quality, set the timing mode of you computer to 1366 x 768 or
1360 x 768 at 60Hz. Refer to the graphic card’s user guide of your computer to set this
timing mode.