Filter
Top Products
1 | Wintal LCD
1. PREFACE
Congratulations on your purchase of a Wintal LCD! Please read this manual
thoroughly before operating the monitor. Make sure the monitor was not damaged
in transit. Should the monitor be damaged, do not install it and contact your dealer.
Check that you have all the accessories according to the model.
2. SAFETY PRECAUTIONS
Place the Monitor on a stable surface.
Do not use the monitor with other fi xations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.
Do not block or cover the ventilation openings on the monitor.
If you have a wall mount, check that it is steady.
Power source
e monitor must be plugged with a voltage source of 220/240 volts and 50 Hz.
Connection cable
Power cord and cables must be properly routed and protected to prevent people from
stepping on them and causing the monitor to fall.
Heating sources and humidity
Keep the monitor dry and away from humidity.
Keep the monitor away from heat sources
Cleaning and maintenance
Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the
monitor.
Only clean the monitor with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those suggested by the
manufacturer. Using incorrect spare parts can lead to electric shocks, short-circuits
fi re or other incidents.
Lightning/ Holidays
Unplug the LCD during lightning storms or when not used for long periods of time.
Manual 32LDVD05.indd Sec1:1Manual 32LDVD05.indd Sec1:1 27/07/2005 4:37:39 PM27/07/2005 4:37:39 PM