Filter
Top Products
Hydraulic Installation 13
PN - 59744 (12/14/01)
#59732 Hose Kit Cont’d
Assemble Hoses
1. Attach 90 degree elbow (2) and male quick cou-
pler (3) (not supplied in kit) to three loader supply
hoses (1).
2. Attach 90 degree elbow (2), swivel adapter (4),
and male quick coupler (3) to fourth loader supply
hose.
1. 40488 46” Hose, 3/8 x 8JICM x 8JICF
2. 313030 90° Elbow, 8JICM x 3/8 NPTM
3. – – – – 3/8 Male quick coupler
4. 315039 Swivel pipe adapter, male to
female
Connect Hoses to Loader
1. Connect the three loader supply hoses with 90
degree elbows to loader steel feedlines 2, 3, & 4.
2. Connect loader supply hose with 90 degree
elbow and swivel adapter to loader steel feedline 1.
3. See Figure 10 for locations.
1. - Bucket Cylinder, Rod End
(Rollback) - Blue
2. - Bucket Cylinder, Base End
(Dump) - Red
3. - Boom Cylinder, Rod End
(Down) - Orange
4. - Boom Cylinder, Base End
(Up) - White
Figure 10 Loader Feedline Identification
Connect Hoses to Tractor
NOTE: Route hydraulic hoses along loader mount to
tractor hydraulic couplers located in front of the brake
pedals. Be sure to avoid contact with brake pedals
and other moveable tractor components.
Hoses must be routed so that they are not pinched,
bent sharply or chafed during operation. Hoses must
not interfere with any tractor control operation or con-
tact any moving parts.
1. Connect hydraulic hoses to tractor hydraulic cou-
plers as shown in Figure 11.
2. Attach color coded plastic bands around fittings to
identify quick coupler connections.
Figure 11 Hydraulic Hose Connection
1
LOADER FEEDLINES
RH
LOADER
BOOM
12
34
1
2
4
3
DP5