Xerox VO400E Flat Panel Television User Manual


 
VIZIO VO400E User Manual
8
www.VIZIO.com
Setting Up Your HDTV
! Read this user manual carefully before installing your HDTV.
! The power consumption of your HDTV is about 128W. Use the included power cord. When an
extension cord is required, use one with the correct power rating. The cord must be grounded and
the grounding feature must not be compromised.
! Your HDTV should be installed on a flat surface to avoid tipping.
! For proper ventilation, you must allow space between the back of your HDTV and the wall.
! If you want to mount your HDTV on the wall, see below for additional information.
! Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
! Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Contact VIZIO for more information on these services at
888-VIZIOCE (888-849-4623) or www.VIZIO.com
.
Wall Mounting your HDTV
Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow
the instructions below.
1. If the base has been attached, remove the
base:
a. Disconnect the cables from your
HDTV.
b. Place your HDTV face down on a soft,
flat surface to prevent damage to the
screen.
c. Remove the eight (8) screws holding
the stand neck to your HDTV.
2. Mount your HDTV on the wall:
a. Attach your HDTV to a wall mount
(sold separately) using the mounting
holes in the back panel of your HDTV.
b. Read the instructions that came with
your specific wall mount to properly
hang your HDTV.