Filter
Top Products
VIZIO VO400E User Manual
Version 9/21/2009 9
www.VIZIO.com
Chapter 1 Basic Controls and
Connections
Front Panel
POWER ‘VIZIO’ LIGHT– The VIZIO name lights white when
powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to the
sensor. Point the remote control directly at this window for
the best response to the remote signal.
Side Panel Controls
POWER ( ) – Switch the HDTV on by pressing the button once. Press
the button again to the HDTV off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu
is active, pressing this button will proceed to the next level.
CH + / - – Use these buttons to step up or down the TV channels. While the
OSD is active, these buttons function as up and down controls in the OSD
menus.
VOL + / - – Use these buttons to increase or decrease to the speaker
volume. While the OSD is active, these buttons function as left and right
controls in the OSD menus.
INPUT (ENTER) – Repeated pressing of this buttons steps through the
input sources in the following sequence: TV, AV, Component1,
Component2, RGB, HDMI 1, HDMI 2, and HDMI3. Once you have
stepped through the entire sequence, you will return to the beginning. If
a sub-menu is active, pressing this button will return to the previous
menu level.
Additionally, when the OSD is active, this button confirms the menu
function to be adjusted. When the OSD is not active, pressing this
button will display the current input mode.