Filter
Top Products
Chapter 2 - Installing the Yamaha CRW4416S Drive
8
Installing the CRW4416S drive
The following steps will differ slightly depending on the type of com-
puter you are using.
For details on removing the cover from your computer, and installing or
removing internal devices, refer to the manual for your computer. (This
user guide assumes that a SCSI card has already been installed.)
1. Switch off your computer, and unplug it from the AC outlet.
If you fail to do this, there is a danger of electric shock and/or of causing
short circuits, which may damage the computer and/or CRW4416S drive.
2. Remove the cover from your computer.
Be careful not to lose the screws that were removed.
PUSH
OFF