Filter
Top Products
Programming a recording (TIMER) 56
English
9 Switch off with B/I.
The programmed recording will only function properly if the DVD recorder has
been switched off using the B/I button.
If any of the TIMER blocks are in use, “TIMER” will light up on the recorder display.
1 Switch on the TV set. If required, select the programme number for the DVD
recorder (channel 3 or 4).
2 Press TIMER on the remote control.
The programming mode selected last is marked.
3 Select “Timer List” using w or v and confirm with u.
4 Select the programmed recording (TIMER) you want to check, change or delete
with w or v.
5 Press u.
Select the input field with t or u.
If required, change the information with v, w or the number buttons 0..9.
6 Confirm with ENTER/OK.
7 To end, press TIMER.
8 Switch off with B/I.
How to change or delete a
programmed recording (TIMER)
Tip
Delete programmed recording
1 Press the CLEAR button.
2 Confirm with ENTER/OK. “Timer Cleared” will briefly appear on the TV
screen.
“-- ---” appears rather than the displayed values
3 To end, press TIMER.
Timer
To change
Press >
To exit
Press TIMER
Timer List
Total record time: 01:40
Rec
Date Ch. Start End Mode
01/22 01 04:25PM 06:05PM M2
--/-- ----- --:-- --:-- ---