Filter
Top Products
Before you call an engineer 66
English
I cannot playback (Super) Video CDs
✓ It is possible that this (Super) Video CD contains a menu and the “PBC” is switched
off. You can see this in status field “PBC OFF”. To activate this function, proceed as
follows:
1 Press SYSTEM-MENU while the (Super) Video-CD is inserted.
2 Select “ ” using t or u.
3 Select line “Features” using w or v and confirm with u.
4 Select “On” in line “PBC” using w or v.
5 Confirm with ENTER/OK and end with SYSTEM-MENU.
Poor playback on DVD recorder: (distorted
picture/distorted sound)
✓ Your TV set is not properly adjusted.
✓ Disc is dirty: Clean the disc
✓ Sometimes the picture may be temporarily distorted. This is not a defect of your
DVD recorder.
No recording possible:
✓ The TV channel you want to record is not stored or you selected the wrong pro-
gramme number:
Check TV channels stored.
✓ Disc write-protected (recording protected): Remove write-protection or change
the disc. For more information, please see “Preventing accidental erasing of discs”
in chapter “Manual Recording”.
✓ An already finalised DVD+R has been inserted: Change disc.
Programmed recording does not work:
✓ You have programmed the wrong time or date: Check time/date.
✓ You have not set the TIMER properly: Check the programmed recordings (TIMER
block).
✓ Locked disc inserted: Remove disc lock.
✓ An already finalised DVD+R has been inserted: Change disc.
The wrong TV channel was decoded
(entered) after you programmed a
recording using VCR Plus+ System.
1 Enter the VCR Plus+ programming number of the TV channel you want.
2 Confirm with ENTER/OK.
3 Check the programme number/channel name in the “Prog.” input field.
4 If this does not correspond to the desired TV channel, select the input field and
change the programme number/channel name.
5 Confirm with ENTER/OK.
There is picture or sound interference on
TV reception:
✓ Have your aerial checked.
✓ You will find information on how to change the TV system in “Manual TV channel
search” in “Installing your DVD recorder”.
Distorted sound coming from a connected
hi-fi amplifier
✓ The DVD recorder is connected to the “Phono-input” of your amplifier: This jack is
provided only for record players without a preamplifier. Select a different audio
input.
The picture is distorted or black-and-white
during playback
✓ The TV system of the disc does not match that of your TV set (PAL/NTSC).
✓ The recording can be made in colour only when the TV channels or the connected
additional device send a colour signal. Black-and-white signals containing no color
information (colour subcarriers) cannot be recorded.
No sound signal at the digital output
✓ Check whether the sound settings match the selected inputs and connected addi-
tional devices.
PROBLEM SOLUTION