Filter
Top Products
Access control (Child Lock) 64
English
Changing the country
The set filter values depend on the respective country. It is therefore necessary to
enter the country to which these filter values apply.
1 Switch on the TV set. If required, select the programme number for the DVD
recorder.
2 Switch on the DVD recorder using B/I.
3 Press SYSTEM-MENU. The menu bar appears
4 Select the “ ” icon using t or u.
5 Select line “ (Disc features)” using w or v and confirm with u.
6 Confirm the line “Access control” using u.
7 Enter your four-digit code. If the code is new, you may have to enter the code a
second time as confirmation.
8 Select “Change country” using w or v and confirm with u.
9 Select the corresponding country using v or w and confirm with ENTER/OK.
0 To end, press t and then SYSTEM-MENU.
1 Switch on the TV set. If required, select the programme number for the DVD
recorder.
2 Switch on the DVD recorder using B/I.
3 Press SYSTEM-MENU. The menu bar appears
4 Select the “ ” icon using t or u.
5 Select “ (Disc features)” using w or v and confirm with u.
6 Confirm “Access control” using u.
7 Enter your four-digit PIN code. If the code is new, you may have to enter the code
a second time as confirmation.
8 Select “Change code” using v or w and confirm with u.
9 Enter the new code using the number buttons 0..9. Enter the same code again as
confirmation.
0 Quit using t and SYSTEM-MENU.
Changing the PIN code
Tip
I have forgotten my code
Press STOP four times (step 7), then press ENTER/OK. Access control is
now switched off. You can now enter a new code as described above.
n
Access control Enter code . . .
Auto resume On
Disc features
n
Access control Enter code . . .
Auto resume On
Disc features