Filter
Top Products
14
8. Restart the computer.
The driver has been installed.
● Selecting the destination for the MIDI signal output
This section explains how to set up the UX96 for use with Windows Media Player
(included in Windows) or an equivalent program. For information on setting up
your sequence software, refer to the owner’s manual for the software.
1. Select [My Computer | Control Panel] and double-click to open “Sounds and
Multimedia (Multimedia).”
For Windows Me users, if you do not see “Sounds and Multimedia” in the “Control
Panel,” click “View all Control Panel options.”
2. Click the “Audio (MIDI)” tab.
3. Click “Preferred device” in “MIDI Music Playback” to view “YAMAHA USB OUT
xx-yy.” Select a driver according to the port number of the connected MIDI
device. For Windows Me users, check the “Use only preferred devices” check-
box.
The variable “xx” represents the device number (page 21) and “yy” represents the port
number (page 20). If only one UX96 is connected, the device number is “0.”
For Windows 98 users, select the driver while “Single instrument” is selected.
If “YAMAHA USB OUT xx-yy” is not displayed, the drive has not been installed
correctly. Delete the driver (page 26) and re-install the driver.
4. Click [OK].
Windows 98
Windows Me
NOTE
NOTE
NOTE
NOTE