Filter
Top Products
18
7. After the search operation is complete, make sure that “USB-MIDI 1” is listed in
the “OMS Driver Setup” dialog, then click [OK].
If the UX96 is not detected correctly, “USB-MIDI 1” does not appear. Check the cable
connection and repeat the procedure from the beginning.
If your iMac does not detect the UX96, “iMac Update 1.1” may not have been installed.
See page 7 for more information.
The system displays one “USB-MIDI x” message for each connected UX96.
8. Make sure that “USB-MIDI 1” and multiple Port numbers are listed in the “OMS
MIDI Device Setup” dialog. Check all Ports 1–6 check boxes.
Click [OK].
9. The system displays a dialog box that enables you to save the setup file. Enter
the file name and click [Save].
NOTE
NOTE
NOTE