Zenith Z52SZ80 Projection Television User Manual


 
Owner’s Manual 43
Troubleshooting Checklist
No picture &
No sound
Check whether the TV is turned on.
Is the power cord inserted into wall power outlet?
Test the wall power outlet, plug another products power cord into the outlet
where the TVs power cord was plugged in.
No or poor color
or poor picture
Select Color in the Picture menu and press the G button.
(Refer to p.24)
Keep a sufficient distance between the TV and the VCR.
Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the screen gets dark.)
The Remote Control
doesnt work
Check to see if there is any object between the TV and the Remote Control
causing obstruction.
Are batteries installed with correct polarity (+ to +, - to -)?
(Refer to p.10)
Correct remote operating mode set: TV, VCR etc.?
Install new batteries. (Refer to p.10)
Picture OK &
No sound
Press the VOLUME (G) button.
Sound muted? Press MUTE button.
Picture appears slowly
after switching on
This is normal, the image is muted during the TV startup process. Please
contact your service center, if the picture has not appeared after five minutes.
Horizontal/vertical bars
or picture shaking
Check for local interference such as an electrical appliance or power tool.
T
T
roubleshooting Checklist
roubleshooting Checklist
Downloaded from www.Manualslib.com manuals search engine