Filter
Top Products
Chapter 8 Storage
Media Server User’s Guide
168
The following table describes the labels in this screen.
8.5 Creating an External (USB) Volume
Click the Create a New External Volume button (or the Create a USB Volume button
depending on your model) in the Storage screen as shown in Figure 57 on page 163 to open the
following screen. Use this screen to create a new NSA external disk drive volume.
Note: Creating a volume formats the drive. All data on the disk will be lost.
Figure 62 Storage > Create an External Volume
The following table describes the labels in this screen.
Table 25 Storage > Volume > Scan
LABEL DESCRIPTION
Auto File Repair Select this to have the NSA automatically attempt to repair any errored files it detects
during the scan. This may also result in the NSA finding some files and placing them in the
Lost and Found share.
Apply Click this to have the NSA scan the volume.
Cancel Click this to close this screen without scanning the volume.
Table 26 Storage > Create an External Volume
LABEL DESCRIPTION
Volume Name Type a volume name from 1 to 31 characters. The name cannot be the same as another
existing external volume.
Acceptable characters are all alphanumeric characters and " " [spaces], "_" [underscores],
and "." [periods].
The first character must be alphanumeric (A-Z 0-9).
The last character cannot be a space " ".
Available Disk(s) Select the external (USB) device upon which you want to create the volume.