Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice
5-92 61179641AL1-5C
Caller ID Features Menu
Caller ID Features
Main Menu\System Management\Modem Configuration\Caller ID Features\
The Caller ID Features menu (see Figure 5-60) is used to provision the caller ID options.
Figure 5-60. Caller ID Features Menu
The Caller ID Features menu options are shown in Table 5-61.
Table 5-61. Caller ID Features Menu Options
Option Description Function
1 Caller ID This option is used to enable or disable the Caller ID
option.
2 Reject Calls with no Caller ID This option is used to reject call that do not contain a
Caller ID. The Caller ID option above must be enabled
for this option to be enabled.
3 Only Allow Specified Phone
Numbers
This option is used to specify if the system accepts a call
from any phone number or only specified numbers.
4 Phone Numbers This option is used to enter one or two phone numbers
that the system validates before establishing a
connection.
TID: TA1248 Total Access 1248 MM/DD/YY HH:MM
Unacknowledged Alarms: None
Caller ID Features
1. Caller ID Disabled
2. Reject Calls with no Caller ID No
3. Only Allow Specified Phone Numbers No
4. Phone Numbers
Selection :
'?' - System Help Screen
