Local Administrative Options
Static Addressing Installation
3-5
One of the following texts is displayed left-justified at the top of the display, depending on the
current status of 802.1Q:
2. Press the 1 or 0 button to turn 802.1Q on or off respectively.
The display is updated to show the current status of 802.1Q.
Press the # button to continue the procedure without changing the displayed status of 802.1Q
The following text is displayed left-justified at the top of the display:
where d is the value of the 802.1 audio parameter.
3. Enter a valid value (between 0 and 7) for the new value of the 802.1 audio parameter.
The following text is displayed left-justified at the top of the display:
where d is the value of the 802.1 signaling parameter.
4. Enter a valid value (between 0 and 7) for the new value of the 802.1 signaling parameter.
The following text is displayed left-justified at the top of the display:
where dddd is the value of the 802.1 VLAN ID.
5. Enter a valid value (between 0 and 4095) for the new value of the 802.1 VLAN ID.
The following text is displayed left-justified at the top of the display:
where dd is the value of the Differential Services audio parameter.
6. Enter a valid value (between 0 and 63) for the new value of the Differential Services audio
parameter.
The following text is displayed left-justified at the top of the display:
If 802.1Q is off: 802.1Q=off
1=on #=OK
If 802.1Q is on: 802.1Q=on
0=off #=OK
L2 audio=d
New=_
L2 signaling=d
New=_
VLAN ID=dddd
New=_
L3 audio=dd
New=_
L3 signaling=dd
New=_
