Chapter 7
118 Avaya C360 Manager User Guide
2. Enter the parameters for the Frame Relay sub-interface using the
fields at the bottom of the dialog box.
3. Click
Apply. The Frame Relay sub-interface is created.
To modify the parameters of a Frame Relay sub-interface:
1. Click the Frame Relay sub-interface you want to modify. The
configuration parameters of the selected sub-interface appear in
the bottom of the dialog box.
2. Modify the parameters you want to change using the fields at the
bottom of the dialog box.
3. Click
Apply. The Frame Relay sub-interface parameters are
modified.
To delete a Frame Relay sub-interface:
1. Click the Frame Relay sub-interface you want to delete.
* Note: You can only delete Frame Relay sub-interfaces on which no
IP interfaces are defined.
2. Click
Delete. A confirmation dialog box opens.
3. Click
Yes.
4. Click
Apply. The Sub-Frame-Relay interface is deleted.
The following table provides a list of the fields in the Sub-Interfaces tab of
the USP dialog box and their descriptions:
Table 7-12. USP Dialog Box - Sub-Interfaces Parameters
Field Description
Name
The name of the Sub-Frame-Relay interface.
Description
A user defined description of the
Sub-Frame-Relay.
Type
The type of Frame Relay sub-interface.
Currently, only Point-to-Point interfaces are
supported.
Bandwidth
The bandwidth of the Sub-Frame-Relay
interface in bits per second.
