Avaya C360 Manager User Guide 43
Device Configuration
Auto Negotiation
Status
The operational state of the Auto-Negotiation
protocol between two stations. Possible
statuses are:
• Pass - The Auto-Negotiation protocol is
enabled and a common protocol has
been established.
• In progress - The Auto-Negotiation
protocol is in the process of detecting the
communication capabilities of the
endstations and setting them to the
highest common denominator.
• Fail - The Auto-Negotiation protocol
was not able to detect the
communication capabilities of the end
station, or was unable to set them to the
highest common denominator.
• Disabled - The Auto-Negotiation
protocol is disabled.
Duplex Mode
The state of communication of the selected
port. Possible values are:
• Full Duplex - The port can send and
receive simultaneously.
• Half Duplex - The port can either
receive or send, but can not do both
simultaneously.
Speed Mode
The speed of communication of the selected
port. Possible values are:
• Ethernet - 10 Mbps.
• Fast Ethernet - 100 Mbps.
• Gigabit Ethernet - 1000 Mbps.
Flow Control Mode
The state of flow control on the selected port.
Operational Status
The warning level of the selected port.
Possible values are:
• OK
• Warning
• Fatal
Fault Messages
A list of fault messages.
Table 3-7. Port Configuration Fields - General Tab (Continued)
Field Description
