Chapter 3
34 Avaya C360 Manager User Guide
Auto Negotiation
Mode
The configured state of the Auto-Negotiation
protocol between two stations. When enabled,
Auto-Negotiation detects the highest common
denominator for communication between
endstations, and sets both to the same highest
common setting. It also delivers remote link
status.
For LAGs with 10BaseT and 100BaseT ports,
Auto-Negotiation determines the speed and
Duplex Mode of communication between the
endstations. For LAGs with Gigabit ports,
Auto-Negotiation determines the Flow
Control setting of the ports.
Possible values are:
• Enable - Auto-Negotiation is enabled for
this LAG.
• Disable - Auto-Neotiation is not enabled
for this LAG.
For more information, refer to Auto-Negotiation
in The Reference Guide.
Duplex Mode
The state of communication of the selected
LAG. Possible values are:
• Full Duplex - The LAG can send and
receive simultaneously.
• Half Duplex - The LAG can either
receive or send, but can not do both
simultaneously.
Speed Mode
The speed of communication of the ports on
the selected LAG. Possible values are:
• Ethernet - 10 Mbps.
• Fast Ethernet - 100 Mbps.
• Gigabit Ethernet - 1000 Mbps.
Flow Control Mode
The state of flow control on the selected LAG.
Possible values are:
• No Flow Control
• 802.3x Sym
Table 3-5. LAG Configuration Fields - General Tab (Continued)
Field Description
