Belkin N1 Manual

A SERVICE OF

next previous

12

1312

Knowing your Router

section

E. Connections to Wired Computers – Yellow Ports

Connect your wired (non-wireless) computers to these ports.

TheseportsareRJ45,10/100/1000auto-negotiation,auto-

uplinking ports for standard UTP category 5 or 6 Ethernet cable.

The ports are labeled 1 through 4. Use the gray cable provided to

connect your computer to any one of these ports.

F. Connection to ADSL – Gray Port

This port is for connection to your ADSL. Connect your ADSL to

thisport.AnRJ11telephonecordisprovidedinthepackage.

G. Reset Button

The “Reset” button is used in rare cases when the Router may

function improperly. Resetting the Router will restore the Router’s

normal operation while maintaining the programmed settings. You

can also restore the factory default settings by using the “Reset”

button. Use the restore option in instances where you may have

forgotten your custom password.

i. Resetting the Router

Push and release the “Reset” button. The lights on the

Routerwillmomentarilyflash.The“Power/Ready”lightwill

begintoblink.Whenthe“Power/Ready”lightbecomessolid

again, the reset is complete.

ii. Restoring the Factory Defaults

Press and hold the “Reset” button for at least 10 seconds,

then release it. The lights on the Router will momentarily

flash.The“Power/Ready”lightwillbegintoblink.When

the“Power/Ready”lightbecomessolidagain,therestore

is complete.

H. Power Jack – Black

Connecttheincluded12V/1.25ADCpowersupplytothisjack.