26
Connecting and Configuring your Router
Troubleshooting Assistant CD
Belkin has provided our Assistant software to make installing your
Router a simple and easy task. You can use it to get your Router up
and running in minutes. The Assistant software requires that your
Windows 2000, XP, or Vista computer be connected directly to your
ADSL modem and that the Internet connection is active and working
at the time of installation. If it is not, you must use the “Alternate
Setup Method” section in this User Manual to configure your Router.
Additionally, if you are using an operating system other than Windows
2000, XP, or Vista, you must set up the Router using the “Alternate
Setup Method” section in this User Manual.
A. Shut down any programs that are running on your computer
at this time.
Turn off any firewall or Internet-connection-sharing software on
your computer.
B. Insert the CD into your computer. The Troubleshooting Assistant
will automatically appear on your computer’s screen within 15
seconds. Click on “Go” to run the Troubleshooting Assistant.
Follow the instructions there.
IMPORTANT: Run the Setup Assistant from the computer that is
directly connected to the Router from Step 1.1B.
