SkyRider 15
5-2
B06-00-0386
B06-00-0383
B06-00-0289
B06-00-0382
B06-00-0296
B06-00-0009
B06-00-0173
B06-00-0286
B06-00-0146
B06-00-0138
B06-00-0359
B06-00-0349
B06-00-0137
B06-00-0385
B06-00-0170
B06-00-0034
B06-00-0384
TURN RED KNOB COUNTER
CLOCKWISE TO LOWER
CCFA
B06-00-0286
B06-00-0225
STAY CLEAR
WHILE RAISING
OR LOWERING
B06-00-0225
CCFO
Stand clear when raising or
lowering lift.
Pot hole protection device
automatically lowers while lift is
being raised.
Contact with pot hole protection
device will cause serious crushing
injury.
UOT B06-00-0384
This machine is designed and manufactured in
compliance with the ANSI A92.6 standard in force on
the date of manufacture. Dealers, owners, users,
operators, lessors, and lessees are responsible for
inspection, maintenance, training, and operation as
required by A92.6 and the owners manual.
Alterations, modifications, or changes to this
machine without the written authorization of bil-jax,
inc. as well as any unauthorized adjustment of valves,
disabling or by-passing of safety devices or the
improper use of this machine shall exempt bil-jax, inc.
from any liability for any resulting injuries or damage.
B06-00-0382UOT
IF YOU HAVE NOTBEEN PROVIDED WITH SAFETY
LITERATURE,ORFORANYQUESTIONSCONCERNING
THESAFE USEOFTHISEQUIPMENT, CALL419/445-9675.
Inspect unitfordamagedorworn
if liftisnotworkingproperly.
DO NOTusewhenexposedto
wind, rain,snoworice.
DO NOTuse wherelift cancome
intocontactwithoverheadob-
structions such as electrical
wires, cables,ropes orover-
DO NOTdrive nearloading docks,
ditches,holes,unguardedopen-
ings, openelevated shaftsor
parts. DONOT useuntil such
partsarereplaced.DONOTuse
B06-00-0383UOT
FAILURE TO COMPLYWITH THE FOLLOWING SAFETY INSTRUCTIONS OR ANY OTHER IMPROPER
USE OF THIS EQUIPMENT WILL RESULT IN SERIOUS INJURY OR DEATH.
It istheoperator'sresponsibilitytocomplywithallwarningsandinstructions.
drugs oralcohol,orifyoufelldizzy,illor unsteadyinanyway.
ALWAYSsurveythejob siteandidentifyallpotentialhazards.
affect theoriginaldesignofthelift.
Check allsafetydevicesfor
proper functionpriortoeachuse.
DO NOTusewithoutentrygatein
the closedpositionunlessoperatoriswearingafullbodyharnessandlanyardandwith
the lanyardattachedtofactoryprovidedattachmentpoint.
DO NOTraiseplatformwhileonuneven,soft,orslopedsurfaces.
DO NOTDRIVEliftontouneven,
soft, orslopedsurfaceswhile
elevated.
•
•
•
•
•
•
Work onlywithin theplatformguardrailarea anddonotattempt toincreaseworking
height withboxes,ladders, scaffoldingoranyother means.
drop-offs.
or overhangs,etc..
DO NOTexert horizontalforcetoplatformwhile performingwork.
DO NOTmove liftifyoudonot haveaclearview ofthepathoftravel.
DO NOTexceed manufacturer's recommendedloadcapacity.
•
•
•
•
•
•
DONOTstandorsitonguardrails..
DO NOTlean outoverguardrailsto performwork.
DO NOTraise orlowerliftuntilyou arecertainallpersonnel areclear.
DO NOTuse nearcranesorothermoving vehicles.
DO NOTleave keysinmachinewhileunattended.
DO NOTallow flames,sparksorembersnear batteriesanddonot smokenear
batteries. Batteries producehighlyflammablegases whichcanexplode.
OWNERS&OPERATORS ARERESPONSIBLEFORINSPECTION,MAINTENANCE,
TRAINING,ANDOPERATION ASREQUIREDBYTHEOWNERSMANUALANDTHE
ANSIA92.6STANDARD (INEFFECTAT DATE OFMANUFACTURE).
UOT
B06-00-0386
OPERATION INSTRUCTIONS FOR SKYRIDER 15
1. Read and follow safety precautions and all responsibilities sections setforth in the operators manual
2. Make sure the lift is on a firm and levelsurface and that there are no potential hazards such as overhead
obstructions or electrically charged conductors, use the lift where such hazards exist.
3. Check the lift for damaged or worn parts and repairor replace as necessary.
4. Check to be sure that the cage is properly attachedto the lift.
5. Turn master switch to on. Switch is located on theside of the lift.
6. Check to be sure all safety devices are functioning properly.
7. To operate liftfrom the ground turn and hold lower control switch to "lower control"setting then select either
up or down function.
8. To operate liftfrom the platform, turn lower control switch to "upper control" setting.
9. Enter platform and be certain that the entry gate isclosed completely. If operating with entry gateopen, operator
must wear full body harness andlanyard. Stand with back to the mastsections and face entry gate.
TORAISEORLOWER:
Depress and hold the "enable" button(this must be done prior to any other function being activated orreset of
the controls will be necessary).
Press either the raise or lowerbutton.
TO DRIVE:
Depress and hold the "enable" button(this must be done prior to any other function being activated orreset of
the controls will be necessary).
Push joystick in the direction (forwardor backward) that you wish to travel.
Press the steering thumb switch onthe top of the joystick in the direction you wish the liftto turn (either right
or left).
The joystick and steering thumb switchmay be operated simultaneously for smooth maneuvering.
DO NOT attempt tooperate the drive function and the raise/lower function at the same time. The unit will
stop operating and reset of thecontrols will be necessary.
This lift is equipped with alevel sensor that will prevent the lift from raising or driving with platformelevated
while on an unlevel surface. If the lift fails to raiseor drive while elevated, lower platform immediately.
DO NOT
•
•
•
•
•
•
•
24V DC
PATENTPENDING
12FT.
SP-
B06-00-0130
LUBRICATE
MONTHLY
B06-00-0130
RIF
B06-00-0390
COFC B06-00-0192
B06-00-0192
OPERATION AND SERVICE
MANUAL INSIDE
B06-00-0387
SR 15KY IDER
B06-00-0388
SR 15KY IDER
AERIAL WORK PLATFORMS
This equipmenttobeusedbycompetent, fullytrained,andauthorizedpersonnelonly.
Operator mustreadandunderstandowner'smanualandall decalsbeforeoperating.
DO NOT override or alter any safety devicesor make anymodifications that would
NEVER TAKE CHANCES- DONOToperatethis liftifyouare undertheinfluenceof
•
•
•
•
•
•
•
•
•
•
•
DURINGUSE:
BEFOREUSE:
DONOTclimbupordownmasts.
Full Body Harness and Lanyard
must be used whenever lift is
operated with entry gate open.
Failure to wear Full Body Harness
and Lanyard may allow operator
to fall from platform resulting in
serious injury or death.
Transaxle
FreeWheel
Normal Drive
Figure 5-1. Replacement Decals
