25
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
CD changer mode
(optional)
To find out which CD changer is compatible
with this unit, please see page 6 of this ma-
nual or consult your Blaupunkt dealer.
Note:
Information on handling CDs, inserting CDs
and operating the CD changer can be found
in the operating instructions accompanying
your CD changer.
Switching to CD changer mode
➮ Press the CDC button =.
The CD changer menu appears on the dis-
play and playback is resumed at the point
where it was interrupted. If the magazine has
been removed from the CD changer and re-
inserted, the CD magazine will first be
scanned. Playback then begins with the first
track of the first CD the CD changer recogn-
ises.
Selecting a CD
To change up or down to a different CD,
➮ press the soft key 4 with the display
allocation of the desired CD (CD1 -
CD10). To do this, if necessary press
the soft key 4 with the display alloca-
tion “NEXT” to the “second page” of the
basic CD changer menu
or
➮ press the or button 7 repeatedly
until the number of the desired CD ap-
pears on the display.
Selecting a track
To move up/down from one track to another
on the current CD,
➮ press the or button 7 repeatedly
until the number of the desired track ap-
pears on the display.
If the
button 7 is pressed once, the cur-
rent track begins once more.
Fast search (audible)
For a fast search backwards or forwards
➮ keep the or buttons 7 pressed
until the fast search backwards or for-
wards begins.
Changing the display
In CD changer mode, you can switch between
the various display modes:
● display of CD number and track num-
ber;
● display of CD number, track number
and playing time;
● display of time and track number.
● display of CD name and track number.
To switch between the different display
modes,
➮ press the DIS button : repeatedly until
the desired information appears on the
display.
Note:
A CD name can only be displayed if a name
has been allocated to the inserted CD. Please
see the section “Naming CDs”.
Repeating individual tracks or
whole CDs (REPEAT)
➮ In CD changer mode, press the CDC
button =.
The CD changer function menu appears on
the display.
➮ Press the soft key 4 with the display
allocation “RPT”.
“RPT TRCK” appears briefly on the display.
To repeat play of the entire CD,
➮ press the soft key 4 with the display
allocation “RPT” once again.
“RPT CD” appears briefly on the display.
CD CHANGER MODE
