108
Press the k button.
● The display will zoom in on the image and
will appear, if you continue to hold
the k button, it will continue to zoom in up
to a factor of 10x.
● If you press the opqr buttons, you can
move the location of the displayed area.
● When appears on the screen,
press the g button to zoom out, or hold it
to return to single image view.
● If you press the m button, will
display and you will be able to use the qr
buttons to switch between images at the
same level of magnification. Press the m
button again to return to normal.
You can select from four transition effects when switching between images
in single image playback.
Select [Transition].
● Press the n button and select the 1
tab, then select [Transition] and use the
qr buttons to select a transition effect.
● Press the n button to accept the
setting.
Approximate Location of
Displayed Area
+ Changing Image Transitions
(EC256)_CDI-E404_Guide_E.book Page 108 Friday, February 6, 2009 7:44 PM
