16
Use the included charger to charge the battery.
Remove the cover.
Insert the battery.
● Align the marks on the battery and
charger, then insert the battery by sliding it
in and down .
Charge the battery.
● For CB-2LY: Flip out the plug and plug
the charger into a power outlet .
● For CB-2LYE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
The charge lamp lights red and charging
starts.
● The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 55 minutes.
Remove the battery.
● Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in and up .
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
(EC256)_CDI-E404_Guide_E.book Page 16 Friday, February 6, 2009 7:44 PM
