A SERVICE OF

logo

Open as PDF
next previous
C. Registration Roller Assembly
1. Detaching the Registration Clutch
1) Detach the connector cover or the lattice connector
2) Remove the clip ring q, and disconnect the connector w; then, detach the
registration clutch e.
Figure 5-727
2. Detaching the Upper Registration Roller
1) Detach the registration clutch. (See “1. Detaching the Registration Clutch on p. 5-
29.”)
2) Remove the spring q (front) and spring w (rear).
Figure 5-728
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
5-31