A SERVICE OF

logo

7) Loosen the two screws r to loosen the cable tension (both front and right).
Figure 3-405
8) Move the No. 1 mirror mount to the front to align the long hole in the front side plate
and the cable fixing screw t.
Then, detach the cable fixing screw t to separate the No. 1 mirror mount and the
scanner cable (both front and rear).
Figure 3-406
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
3-11
r
t
t
(front)
(rear)