A SERVICE OF

logo

3) Remove the two screws y, and detach the face cover t from the copier’s rear cover.
Fig. 8-704
4) Connect the cable o on the copier side and the RDD’s cable i.
Note:
If a conversion connector is found on the cable !1 from the copier, remove it.
Fig. 8-705
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-28
CHAPTER 8 INSTALLATION
y y
t
o