A SERVICE OF

logo

Converter Settings
Set the camera appropriately after attaching the Wide Converter
WC-DC58A or the TeIe-converter TC-DC58B (no setting is needed
for the 500D Close-Up lens).
1 I_ (Rec.) Menu _ [Converter] _ [Off]*/[WC-DC58A]/
[TC-DC58B].
SeeMenus and Settings (p,27)
Select the attached converter.
* Default setting.
High-Power Flash HF-DC1
This flash is used to supplement the camera's built-in flash when the
subject is too far away for proper illumination. Use the following
procedures to affix the camera and High-Power Flash to the
supporting bracket.
Please read the instructions accompanying the flash along with this
explanation.
Tripod Sockets
Bracket
(Comes with the flash) _ _=_
"O
"O
(D
.-t
x