Changing Shooting Functions
142
Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 minute after pressing the 1
button when in a shooting mode (p. 53). You can set the retraction time to
[0 sec.].
● Select [Lens Retract], then press the qr
buttons to select [0 sec.].
If you set the mode dial to G, you can change the settings in the 4 tab
(p. 48).
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
● Select [Flash Settings], then press the m
button.
● Press the op buttons or turn the  dial to
select [Red-Eye Lamp], then press the qr
buttons to select [Off].
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 156 – 159).
Changing Shooting Functions
(EC260) CDI-E403_Guide_E.book Page 142 Thursday, December 18, 2008 2:02 PM
