![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/d/de/dde4016c-a54f-4a46-a68a-f1095994cb8a/dde4016c-a54f-4a46-a68a-f1095994cb8a-bg93.png)
Changing the Start-up Image or Sound
147
Setting a Recorded Image as the Start-up
Screen Image
When you press the 1 button and set the camera to playback mode, you
can register sounds and images.
● Select [Start-up Image], then press the m
button.
● Press the qr buttons to select [2], then press
the m button.
● Press the qr buttons or turn the  dial to
select an image, then press the m button.
● Press the qr buttons or turn the  dial to
select [OK], then press the m button to
complete registration.
You can register sounds and start-up screen images that come with the included
software to the camera. Refer to the Software Starter Guide for details.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
Using the included software to register sounds and the
start-up screen image