70
You can select the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
Set the mode dial to G (p. 42).
Adjust the settings according to
your purposes (pp. 70 – 80).
Shoot.
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in red. Try the following
settings to obtain the correct exposure.
• Turn on the flash (p. 70)
• Select a higher ISO speed (p. 74)
You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 50 cm – 3.0 m (1.6 – 9.8 ft.), and at
maximum telephoto, it is 1.0 – 2.0 m (3.3 – 6.6 ft.)
Select h.
● After pressing the r button, press the qr
buttons or turn the  dial to select h,
then press the m button.
XOnce set, h will appear.
What if the shutter speed and aperture value are displayed
in red?
If you take multiple shots with the flash, the flash may become warm. This
is not a malfunction.
(EC260) CDI-E403_Guide_E.book Page 70 Thursday, December 18, 2008 2:02 PM
