Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on all platforms.
Usage
Information
The higher this parameter is set, the faster OSPF converge takes place.
NOTE: The faster the convergence, the more frequent the route calculations
and updates. This behavior impacts CPU utilization and may impact adjacency
stability in larger topologies.
Generally, convergence level 1 meets most convergence requirements. Higher
convergence levels should only be selected following consultation with Dell
Networking technical support.
flood-2328
Enable RFC-2328 flooding behavior.
S6000
Syntax
flood-2328
To disable, use the no flood-2328 command.
Defaults Disabled.
Command
Modes
ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
Open Shortest Path First (OSPFv2 and OSPFv3)
1077
