Version Description
8.3.7.0 Introduced on the S4810.
Usage
Information
On 40-port 10G stack-unit if the traffic is shaped between 64 and 1000 Kbs, for
some values, the shaped rate is much less than the value configured.
Related
Commands
rate shape — shapes traffic output as part of the designated policy.
qos-policy-output — creates a QoS output policy.
service-policy input
Apply an input policy map to the selected interface.
S6000
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy
input policy-map-name [layer2] command.
Parameters
policy-map-
name
Enter the name for the policy map in character format (32
characters maximum). You can identify an existing policy
map or name one that does not yet exist.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is
Layer 3.
Defaults Layer 3
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage
Information
You can attach a single policy-map to one or more interfaces to specify the
service-policy for those interfaces. A policy map attached to an interface can be
modified.
Quality of Service (QoS)
1271
