Parameters
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to
view information on dampened routes corresponding to that
VRF.
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the
keyword
multicast to view dampened-route information
related only to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the
keyword
multicast to view dampened-route information
related only to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to view dampened-route information
related only to ipv6 unicast routes.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
b
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced IPv6 MGBP support for the E-Series.
distance bgp
Define an administrative distance for routes.
S6000
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Border Gateway Protocol
455
