ENGLISH
53
(3)
Presetting FM and AM stations
Example: Presetting FM station (currently tuned in) at preset number P03
1
Tune in the broadcast station that is to be preset and press
the Memory button.
• A “P - -” indication flashes for 10 seconds.
2
While the “P - -” indication is flashing, use the shift button and
the channel (CH) buttons (–, +) to display the preset number
“P03”.
3
Press the MEMORY button while the “P03” display is
flashing.
• The “P03” display will light and presetting will be
completed.
Presetting
• Up to 40 AM or FM stations can be preset using this procedure.
• In addition to the reception frequency, the reception mode (monaural or auto) is also preset, so check the display when presetting stations.
• If a station is preset at a number where a station is already preset, the previous station is replaced with the new station.
• The preset memory is not cleared when the power cord is unplugged.
(4)
Listening to preset stations
Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)
1
Press the remote control shift button and the channel (CH)
button (–, +) and select preset number “P03”.
✽ Each press of the shift button adds 10 to the current preset number
in the range of P00 to P40.
Example:
Starting with a P13
setting, each press of
the shift button results
in the changes P13 /
P23 / P33 / P03 /
P13 /...
Example:
Starting with a P00 setting, each press of the shift button results in
the changes P00 / P10 / P20 / P30 / P40 / P10 /...
